Rigging
The Amie-Sub comes standard with 3/8-inch - 16 mounting points on both sides. The Amie-Sub may be mounted on the ceiling with the optional MUB-Amie-Sub U-Bracket. In addition, an optional black cloth grille frame is available for applications where such an appearance is desired. Details for these optional rigging kits are provided in the Amie-Sub Rigging Accessories table.
Important Safety Considerations
When installing Meyer Sound loudspeakers, the following precautions should always be observed:
All Meyer Sound products must be used in accordance with local, state, federal, and industry regulations. It is the owner’s and user’s responsibility to evaluate the reliability of any rigging method for their application. Rigging should only be carried out by experienced professionals.
Use mounting and rigging hardware that has been rated to meet or exceed the weight being hung.
Make sure to attach mounting hardware to the building's structural components (studs or joists), and not just to the wall surface. Verify that the building's structure and the anchors used for the installation will safely support the total weight of the mounted loudspeakers.
Use mounting hardware appropriate for the surface where the loudspeaker will be installed.
Make sure bolts and eye bolts are tightened securely. Meyer Sound recommends using Loctite® on eye bolt threads and safety cables.
Inspect mounting and rigging hardware regularly. Immediately replace any worn or damaged components.
Amie-Sub Rigging Accessories
Model | Features |
|---|---|
MUB-Amie-Sub U-Bracket (PN 40.251.050.01) | The MUB-Amie-Sub U-Bracket enables the mounting of a single Amie-Sub loudspeaker to the ceiling. The kit includes two 3/8-inch - 16 screws and two washers for attaching the MUB-Amie-Sub to the loudspeaker. |
Black Cloth Grille Frame (PN 40.251.006.01) | This optional black cloth grille frame magnetically mounts on top of the steel grille for applications where this appearance is more desirable. |
MUB-Amie-Sub U-Bracket
The optional MUB-Amie-Sub U-Bracket (40.251.050.01), shown in the figures below, enables the mounting of a single Amie-Sub loudspeaker to the ceiling. The MUB-Amie-Sub has 3/8-inch - 16 mounting points on both sides of the cabinet. The kit includes two 3/8-inch screws/washers for attaching the MUB-Amie-Sub to the loudspeaker.
 |
MUB-Amie-Sub U-Bracket
 |
MUB-Amie-Sub Ceiling Mount
Black Cloth Grille Frame
The optional grille frame with black cloth mounts on top of the steel grille. It attaches with magnets, three on top and three on bottom.
 |
Optional Black Cloth Grille Frame