Accessories and Associated Products
MCP50-X40 Cluster Plate — The MCP50-X40 50 Degree Cluster Plate kit includes two cluster plates to facilitate installation of ULTRA-X40/42 loudspeakers in both horizontal and vertical clusters at angles between 10 and 50 degrees in 5 degree increments. The kit includes eight M8 bolts and eight M8 knobs. The MTC-X40 Top Channel accessory (sold separately) can be attached to the MCP50-X40 as a top pick up point.
 |
MCP50-X40 Cluster Plate
|
MCP70-X40 Cluster Plate — The MCP70-X40 70 Degree Cluster Plate kit includes two cluster plates to facilitate installation of ULTRA-X40/42 loudspeakers in both horizontal and vertical clusters at angles between 40 and 70 degrees in 5 degree increments. The kit includes eight M8 bolts and eight M8 knobs. The MTC-X40 Top Channel accessory (sold separately) can be attached to the MCP70-X40 as a top pick up point.
 |
MCP70-X40 Cluster Plate
|
MPK-POLE 35MM/M20 Adjustable Pole Mount — Adjustable length 927–1524 mm (36.5–60 in) pole with assisted lift. Lower shaft fits 35 mm cups or use the removable M20 threaded lug for added stability. Upper shaft includes a PAS-M20 Adapter Sleeve to fit loudspeakers with 35 mm and M20 internal pole mounts onto a 35 mm speaker stand. (Can also buy the PAS-M20 Adapter Sleeve separately). Additional 35 mm to 38 mm (1.5 in) adapter and PAS-M8 Adapter Sleeve included.
 |
MPK-POLE 35MM/M20 Pole Kit (PAS-M20 and PAS-M8 Adapter Sleeves and 38 mm (1.5 in) adapter included)
|
MTB-X40 Top Bracket — The MTB-X40 Top Bracket kit includes a heavy-duty, U-bracket style accessory that facilitates mounting of ULTRA-X40/42 loudspeakers from the ceiling or a truss using the cluster plates. The design supports 5–25 degrees of downtilt and 5 degrees of uptilt. In addition, the MTB-X40 Top Bracket enables mounting of a single ULTRA-X40/42 onto the floor for front-fills. The kit includes four M8 bolts and four M8 knobs.
 |
MTB-X40 Top Bracket
|
35MM Pole Stand Adapter — This large base stand adapter can be used to mount the MTB-X40 Top Bracket or the MUB-X40 U-bracket onto a pole.
|
MTC-X40 Top Channel — The MTC-X40 Top Channel kit includes a pinnable link in a channel that mounts directly to the top of the ULTRA-X40/42 rig nuts or into an MCP50-X40 or MCP70-X40 plate and supports pick-up of up to three ULTRA-X40/42 loudspeakers from a single point using the two included lock pins and 3/8-inch shackle. Using the MTC-X40 Top Channel at the bottom of the ULTRA-X40/42 to pick up multiple loudspeakers requires the use of a Thread Reducer M20 to M8 (35MM), which is not included.
 |
MTC-X40 Top Channel
|
MUB-X40 U-Bracket The MUB-X40 U-Bracket allows a single ULTRA-X40/42 loudspeaker to be mounted to a wall (in either vertical or horizontal orientations), to the ceiling or onto the floor. The kit includes two M8 bolts, two M8 knobs, and a Thread Reducer M20 to M8 (35 MM) to convert the cabinet’s built-in pole mount internal threads to M8 size. The MUB-X40 U-Bracket can also mount an ULTRA-X40/42 to a pole horizontally using the optional 35MM Pole Stand Adapter.
 |
MUB-X40 U-Bracket and included Thread Reducer M20 to M8 (35 mm) shown with optional 35MM Pole Stand Adapter
|
MYA-X40 Mounting Yoke The MYA-X40 Yoke suspends a single ULTRA-X40/42 loudspeaker and supports a wide range of horizontal and vertical adjustments. The yoke attaches to the top of the loudspeaker using three rig nuts. The kit includes three M8 bolts and three M8 knobs. The yoke may also be mounted on a 35 mm pole using the optional MSA-STAND Adapter Cup 35MM accessory to facilitate easy panning and tilting.
 |
MYA-X40 Yoke and optional MSA-STAND Adapter Cup 35MM
|
MSA-STAND Adapter Cup 35MM — This compact cup-type adapter can be used to mount the MYA-X40 Mounting Yoke on a pole to allow for easy panning and tilting of the ULTRA-X40/42.
|
Thread Reducer M20 to M8 (35 mm) — The Thread Reducer kit includes a 35 mm diameter, M20 to M8 thread size adapter to convert the cabinet’s built-in pole mount internal threads to M8 size. It is necessary for installing the MUB-X40 U-Bracket (one is included in the MUB-X40 U-Bracket kit) and when installing the MTC-X40 Top Channel or eye bolts at the bottom of a cabinet (not included in the eye bolts or MTC-X40 Top Channel kits).
 |
Thread Reducer M20 to M8 (35 mm)