MM-10XP SPECIFICATIONS
In this section:
REAR PANEL | |
Audio/Power Connector | Phoenix 5-pin male or EN3 5-pin male (two pins for DC power, three pins for balanced audio) |
Wiring | Pin 1: DC power negative (–) Pin 2: DC power positive (+) Pin 3: Balanced audio shield, chassis/earth Pin 4: Balanced audio (–) Pin 5: Balanced audio (+) |
Input Polarity Switch | Reverses audio input polarity between pins 4 and 5 |
LED | Displays loudspeaker status |
DC POWER | |
Safety Agency Rated Operating Range6 | 48 V DC |
CURRENT DRAW | |
Idle Current | 0.16 A rms |
Maximum Long-Term Continuous Current (>10 sec) | 0.90 A rms |
Burst Current (<1 sec) | 2.5 A rms |
Maximum Instantaneous Peak Current | 3.0 A peak |
Inrush Current | < 7.0 A peak |
Meyer Sound MPS IntelligentDC Power Supply Required | See MPS IntelligentDC Power Supply for specifications |