Skip to main content

Meyer Sound Documentation

MM-10ACX Satellite Configurations
In this section:
meyer-blue-rule-line.png

Single-Channel
meyer-blue-rule-line.png
mm-10acx-single-channel-satellite-en3.jpg

MM-10ACX Single-Channel Satellite System (Shown with EN3 Connectors)

Procedure. To configure a single-channel satellite system with one MM-10ACX and one MM-4XP:

  1. Connect a single audio signal to Audio In for Satellite 1 on the MM-10ACX.

  2. Connect Satellite 1 Out from the MM-10ACX to the loudspeaker input of the MM-4XP.

  3. Set the Input Select switch on the MM-10ACX to SUM CH 1+2 (up).

  4. If necessary, to accommodate for the placement of the subwoofer and satellite loudspeaker, adjust the Input Polarity switch and Gain knob on the MM-10ACX.

Note

The MM-10ACX can power up to two MM-4XPs.

Dual-channel
meyer-blue-rule-line.png
mm-10acx-dual-channel-satellite-en3.jpg

MM-10ACX Dual-Channel Satellite System (Shown with EN3 Connectors)

Procedure. To configure a dual-channel satellite system with one MM-10ACX and two MM-4XPs:

  1. Connect the left audio signal to Audio In for Satellite 1 on the MM-10ACX.

  2. Connect the right audio signal to Audio In for Satellite 2 on the MM-10ACX.

  3. Connect the Satellite 1 Out from the MM-10ACX to the loudspeaker input of left MM-4XP.

  4. Connect the Satellite 2 Out from the MM-10ACX to the loudspeaker input of the right MM-4XP.

  5. Set the Input Select switch on the MM-10ACX to SUM CH 1+2 (up).

  6. If necessary, to accommodate for the placement of the subwoofer and satellite loudspeakers, adjust the Input Polarity switch and Gain knob on the MM-10ACX.

Dual Channel + Sub Channel (2.1)
meyer-blue-rule-line.png
mm-10acx-dual-sub-channel-satellite-en3.jpg

MM-10ACX Dual Channel + Sub Channel System (Shown with EN3 Connectors)

Procedure. To configure a 2.1 satellite system with one MM-10ACX and two MM-4XPs:

  1. Connect the left audio signal to Audio In for Satellite 1 on the MM-10ACX.

  2. Connect the right audio signal to Audio In for Satellite 2 on the MM-10ACX.

  3. Connect the subwoofer audio signal to the Subwoofer Audio In on the MM-10ACX.

  4. Connect the Satellite Out 1 from the MM-10ACX to the loudspeaker input of left MM-4XP.

  5. Connect the Satellite Out 2 from the MM-10ACX to the loudspeaker input of the right MM-4XP.

  6. Set the Input Select switch on the MM-10ACX to SUB CH (down).

  7. If necessary, to accommodate for the placement of the subwoofer and satellite loudspeakers, adjust the Input Polarity switch and Gain knob on the MM-10ACX.