Mounting the MM-10
The MM-10 is available with top and side nut plates with either 3/8-inch-16 or metric M10 threaded nuts. The optional MUB-MM10 u-bracket mounts the MM-10 on ceilings and walls at adjustable angles.
Important Safety Considerations
When installing Meyer Sound loudspeakers, the following precautions should always be observed:
All Meyer Sound products must be used in accordance with local, state, federal, and industry regulations. It is the owner’s and user’s responsibility to evaluate the reliability of any rigging or mounting method for their application. Rigging should only be carried out by experienced professionals
Use mounting and rigging hardware that has been rated to meet or exceed the weight being hung.
Make sure to attach mounting hardware to the building's structural components (studs or joists), and not just to the wall surface. Verify that the building's structure and the anchors used for the installation will safely support the total weight of the mounted loudspeakers.
Use mounting hardware appropriate for the surface where the loudspeaker will be installed.
Make sure bolts are tightened securely. Meyer Sound recommends using Loctite® on bolt threads and safety cables.
Inspect mounting and rigging hardware regularly. Immediately replace any worn or damaged components.
MUB-MM10 U-bracket
The MUB-MM10 U-bracket mounts the MM-10 on ceilings and walls at adjustable angles. The U-bracket’s adjustment slot lets you adjust how close the MM-10 is located to the mounting surface and at what angle the subwoofer will be positioned. The MUB-MM10 is available in two kits with either 3/8-inch-16 hardware (PN 40.199.060.01) or M10 hardware (PN 40.199.060.02)
 |
MUB-MM10 U-Bracket
Ceiling-Mounting with the MUB-MM10
The MM-10 can be mounted on a ceiling or underbalcony area with the MUB-MM10 U-bracket.
 |
MUB-MM10 U-Bracket
Wall-Mounting with the MUB-MM10
The MUB-MM10 U-bracket lets you mount the MM-10 either vertically or horizontally on a wall.
 |
MUB-MM10, Horizontal Wall Mount