Skip to main content

Meyer Sound Documentation

HMS-15AC Mounting Options
In this section:
meyer-blue-rule-line.png

The table below lists the mounting options available for HMS-15AC loudspeakers. All mounting options are rated for mounting a single HMS-15AC loudspeaker with a 7:1 safety factor. For more information, refer to the installation instructions included with the mounting hardware.

Table 1. HMS-15AC Mounting Options

Model (Part Number)

Features

Maximum Uptilt/Downtilt

Weight

Rated for Overhead Mounting

FMB-HMS Fixed Mount Bracket (PN 40.198.040.01)

hms-15ac-fmb-hms-on-speaker.jpg

Mounts HMS loudspeakers (all models) on walls at a fixed 0° angle. The fixed bracket mounts cabinets 0.87 inches [22.1 mm] from the wall.

hms-15ac-fmb-hms.jpg

  • HMS-5: 0°

  • HMS-10: 0°

  • HMS-12: 0°

  • HMS-15: 0°

  • HMS-15AC: 0°

3.1 lbs [1.4 kg]

No

AMB-HMS Adjustable Mount Bracket (PN 40.198.041.01)

hms-15ac-amb-hms-on-speaker.jpg

Mounts HMS loudspeakers (all models) on walls with uptilt or downtilt. The available tilt depends on the HMS loudspeaker model mounted. When installed with no tilt, the bracket mounts cabinets 2.24 inches [56.9 mm] from the wall.

hms-15ac-amb-hms.jpg

  • HMS-5: +5°/–16°

  • HMS-10: +5°/–16°

  • HMS-12: +5°/–12°

  • HMS-15: +5°/–10°

  • HMS-15AC: +5°/–10°

Note

Wider downtilt may be possible depending on the building’s structural components and mounting surface.

4.2 lb [1.9 kg]

No

MYA-HMS-15 Yoke (PN 40.242.035.01)

hms-15ac-mya-yoke-on-speaker.jpg

Suspends HMS-15 and HMS-15AC loudspeakers with a full range of tilt (360°). The yoke can attach directly to ceilings or can accept “C” or “G” hanging clamps with standard 1/2-inch or 12 mm bolts.

hms-15ac-mya-yoke.jpg

  • HMS-15: 360°

  • HMS-15AC: 360°

7.6 lb [3.4 kg]

Yes

MUB-HMS-15 U-Bracket (PN40.242.025.01)

hms-15ac-mub-hms-15-u-bracket-on-speaker.jpg

Mounts HMS-15 and HMS-15AC loudspeakers on walls and ceilings with uptilt or downtilt. The U-bracket includes a loudspeaker attachment slot for placing the loudspeaker closer or further from the mounting surface. The available tilt is determined by how close the loudspeaker is placed to the mounting surface.

hms-15ac-mub-hms-15-u-bracket.jpg

  • HMS-15: +16°/–13°

  • HMS-15AC: +16°/–13°

Note

Wider uptilt and downtilt may be possible depending on the building’s structural components and mounting surface.

7.05lb [3.2kg]

Yes



Caution

When mounting HMS-15AC loudspeakers in soffits, allow at least 3 inches [76.2 mm] above the loudspeaker for the bracket to slide into place. The extra space is also required for ventilation for the loudspeaker’s amplifier and heat sink.

Note

When mounting HMS-15AC loudspeakers in soffits, allow sufficient space around the loudspeaker so its coverage pattern is unobstructed by the walls of the soffit.