Skip to main content

Meyer Sound Documentation

Rain Hoods
In this section:
meyer-blue-rule-line.png

Weather-protected 750-LFCs include a rain hood for indoor/outdoor touring and sheltered outdoor installations. Meyer Sound offers two rain hood models: a fixed rigid rain hood for permanent installations and a collapsible hood for portable applications. Please specify your rain hood preference when placing the order.

750-lfc-rain-hoods.jpg

750-LFC with Rigid Rain Hood (left) and Collapsible Rain Hood (right)

750-LFC Rigid Rain Hood
meyer-blue-rule-line.png

The 750-LFC rigid removable rain hood is easily attached and removed with the included four screws.

Procedure. To attach the 750-LFC rigid rain hood:

  1. Attach any required cables to the 750-LFC loudspeaker.

  2. Attach the rain hood to the user panel, and secure it to the center of the panel with the four pan head Phillips 6/32 x 0.38-inch stainless steel screws provided.

  3. Make sure to tighten the screws to create a good seal against the user panel. Meyer Sound recommends using a torque value of 10–12 in-lbs (1.1–1.4 N·m).

750-LFC Collapsible Rain Hood
meyer-blue-rule-line.png

The 750-LFC collapsible rain hood is installed on the unit when shipped. Four screws secure its frame permanently.

Procedure. To use the 750-LFC Collapsible rain hood:

  1. Detach the Velcro straps and extend the rain hood

  2. Extend the lower flap for splash protection.

  3. Attach any required cables to the 750-LFC.

    The clear windows let you easily locate the connectors on the user panel.

  4. To stow the rain hood, reverse the steps.

Caution

The weather-protected 750-LFC must be mounted with a 0-degree tilt, or preferably with a slight downtilt. This shields the driver from the elements and does not accumulate water.