Datasheet — PANTHER
PANTHER-L, PANTHER-M, PANTHER-W



Specifications

ACOUSTICAL 1 | PANTHER-L | PANTHER-M | PANTHER-W |
Operating Frequency Range | 55 Hz – 16 kHz | ||
Maximum Sound Level2 | 150.5 dB | 150.5 dB | 149.5 dB |
AES75 Maximum Linear Sound Levels | 127.5 dBZ, 144.5 dBZpk, 125.5 dBA, with an RMS input level of +8.3 dBV, 50º C | 126.5 dBZ, 144 dBZpk, 125 dBA, with an RMS input level of +6.8 dBV, 50º C | 126.5 dBZ, 142.5 dBZpk, 123 dBA, with an RMS input level of +6.4 dBV, 50º C |
COVERAGE3 | |||
Horizontal Coverage | 80° | 95° | 110° |
PHYSICAL | |||
Weight | 150 lbs. (68 kg) | ||
Enclosure | Premium multi-ply birch, slightly textured black finish | ||
Protective Grille | Powder-coated, stamped steel | ||
Rigging | End frames with captive GuideALinks secured with 0.4375 in x 0.090 in quick-release pins that allow 0.5°– 9° splay angles; detachable side handles | ||
IEC Ingress Protection Rating (IP Rating) | P55, when connected to cables terminated with Neutrik TOP connectors | ||
AC POWER | |||
Connector | Neutrik powerCON TRUE1 TOP (True Outdoor Protection) | ||
Operating Voltage Range | 200 – 240 V AC, 50 or 60 Hz | ||
POWER CONSUMPTION | |||
Max Long-Term Continuous Power (>10 sec) | 1100 W | ||
Burst Power (<1 sec) | 2200 W | ||
Idle Power | 150 W | ||
ANALOG AUDIO INPUT 4 | |||
Connector | Neutrik XLR 3-pin TOP (True Outdoor Protection) female input with male loop output. | ||
Input Level | Source must be capable of producing +24 dBU into 50 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker | ||
DIGITAL AUDIO INPUT4 | |||
Connector | Neutrik etherCON TOP (True Outdoor Protection) | ||
Digital Format | AVB, Milan Certified | ||
MONITORING | |||
Telemetry | Loudspeaker telemetry transmitted via the Ethernet port, displayed in software | ||
TRANSDUCERS | |||
Low Frequency | Two 12-inch long-excursion cone drivers; 4 Ω nominal impedance | ||
High Frequency | Two 3-inch diaphragm compression drivers coupled to a horn; 8 Ω nominal impedance |
![]() | ![]() |
Notes

Loudspeaker system predictions for coverage and SPL are available in Meyer Sound’s MAPP System Design Tool.
Maximum Sound Level is the Lpeak measured using burst noise.
The PANTHER 2-way loudspeaker has a unique placement of low-mid transducers, and a computationally optimized high horn creating a directional loudspeaker with a controlled pattern for the full frequency range. Arrays of four units and longer functionally create a cardioid polar pattern, which remains consistent at all SPL levels, including when pushed into limiting, and does not require any user settings.
Both analog and digital audio inputs are provided as standard.