Datasheet — 2100-LFC
Low-Frequency Control Element
Specifications
ACOUSTICAL | |
Operating Frequency Range | 30 Hz – 125 Hz |
AES75 Maximum Linear Sound Levels | 139.1 dBZpk, 129.2 dBZ, with an RMS input level of +6.0 dBV for analog, -17.8 dBFS for digital |
| |
COVERAGE | |
360° (single unit) | |
PHYSICAL | |
Weight | 235 lbs. (106.6 kg) |
Enclosure | Premium multi-ply birch, slightly textured black finish |
Protective Grille | Powder-coated, stamped steel |
Rigging | End frames with captive GuideALinks secured with 0.4375 in x 0.090 in quick-release pins |
IEC Ingress Protection Rating (IP Rating) | IP55, when connected to cables terminated with Neutrik TOP connectors |
POWER CONSUMPTION | |
Max Long-Term Continuous Power (>10 sec) | 1200 W |
Burst Power (<1 sec) | 2400 W |
AC POWER | |
Connector | Neutrik powerCON TRUE1 TOP (True Outdoor Protection) |
Operating Voltage Range | 200 – 240 V AC, 50 or 60 Hz |
ANALOG AUDIO INPUT (standard equipped) | |
Connector | Neutrik XLR 3-pin TOP (True Outdoor Protection) female input with male loop output |
Input Level | Source must be capable of producing +26 dBU into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker |
DIGITAL AUDIO INPUT (standard equipped) | |
Connector | Neutrik etherCON TOP (True Outdoor Protection) |
Digital Format | AVB, Milan Certified |
MONITORING | |
Telemetry | Loudspeaker telemetry transmitted via the Ethernet port, displayed in software |
TRANSDUCERS | |
Low Frequency | One 21-inch long-excursion cone driver; 4Ω nominal impedance |