Architectural Specifications
HMS-5
The loudspeaker shall be a self-powered, full-range system with an onboard 3-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include two 5-inch long-excursion cone drivers and one 2-inch diaphragm compression driver. The crossover point shall be 1.7 kHz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 55 Hz to 18 kHz; phase response, 250 Hz to 18 kHz ±45°; linear peak SPL, 121 dB with crest factor >17 dB (M-noise). Coverage shall be 80° horizontal by 80° vertical.
The loudspeaker shall be equipped with a single Phoenix 5-pin male connector (two pins for DC power and three pins for balanced audio). Power requirements for the loudspeaker shall be a Meyer Sound MPS IntelligentDC power supply.
Components shall be mounted in a premium multi-ply birch enclosure with a slightly textured black finish. The cabinet shall include rear attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be W: 15.00 in (381 mm) x H: 12.45 in (316 mm ) x D: 9.66 in (245 mm) without mounting bracket. Weight shall be 18.4 lb (8.3 kg).
The loudspeaker shall be the Meyer Sound HMS-5.
|
HMS-10
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 10-inch long-excursion cone driver and one 2-inch diaphragm compression driver. The crossover point shall be 2.5 kHz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 55 Hz to 18 kHz; phase response, 290 Hz to 18 kHz ±45°; linear peak SPL, 125.5 dB with 19.5 dB crest factor (M-noise). Coverage shall be 80° horizontal by 80° vertical.
The loudspeaker shall be equipped with a single Phoenix 5-pin male connector (two pins for DC power and three pins for balanced audio). Power requirements for the loudspeaker shall be a Meyer Sound MPS IntelligentDC power supply.
Components shall be mounted a premium multi-ply birch enclosure with a slightly textured black finish. The cabinet shall include rear attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be W: 15.50 in (394 mm) x H: 19.50 in (495 mm) x D: 12.48 in (317 mm) without mounting bracket. Weight shall be 26.2 lb (11.9 kg).
The loudspeaker shall be the Meyer Sound HMS-10.
|
HMS-12
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 12-inch long-excursion cone driver and one 3-inch diaphragm compression driver. The crossover point shall be 840 Hz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 59 Hz to 18 kHz; phase response, 240 Hz to 18 kHz ±45°; linear peak SPL, 128 dB with crest factor >16 dB (M-noise). Coverage shall be 100° horizontal by 100° vertical.
The loudspeaker shall be equipped with a single Phoenix 5-pin male connector (two pins for DC power and three pins for balanced audio). Power requirements for the loudspeaker shall be a Meyer Sound MPS IntelligentDC power supply.
Components shall be mounted in a premium multi-ply birch enclosure with a slightly textured black finish. The cabinet shall include rear attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be W: 16.80 in (427 mm) x H: 25.12 in (638 mm) x D: 9.78 in (248 mm) without mounting bracket. Weight shall be 43 lb (19.5 kg).
The loudspeaker shall be the Meyer Sound HMS-12.
|
HMS-15
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 15-inch long-excursion cone driver and one 3-inch diaphragm compression driver. The crossover point shall be 680 Hz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 50 Hz to 18 kHz; phase response, 290 Hz – 18 kHz ±45°; linear peak SPL, 132 dB with crest factor >16 dB (M-noise). Coverage shall be 80° horizontal by 50° vertical.
The loudspeaker shall be equipped with dual Phoenix 5-pin male connectors (two pins for DC power and three pins for balanced audio). Power requirements for the loudspeaker shall be a Meyer Sound MPS IntelligentDC power supply.
Components shall be mounted in a premium multi-ply birch enclosure with a slightly textured black finish. The cabinet shall include rear and side attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be W: 19.00 in (483 mm) x H: 29.10 in (739 mm) x D: 12.50 in (318 mm) without mounting bracket. Weight shall be 60 lb (27.2 kg).
The loudspeaker shall be the Meyer Sound HMS-15.
|
HMS-15AC
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 15-inch long-excursion cone driver and one 3-inch diaphragm compression driver. The crossover point shall be 680 Hz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 50 Hz to 18 kHz; phase response, 290 Hz – 18 kHz ±45°; linear peak SPL, 132 dB with crest factor >16 dB (M-noise). Coverage shall be 80°horizontal by 50° vertical.
Audio connectors shall be XLR 3-pin, female and male, accommodating balanced audio, or XLR 5-pin, accommodating both balanced audio and RMS. The internal power supply shall perform automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression. Power requirements shall be nominal 100, 110, or 230 V AC line current at 50–60 Hz. UL and CE operating voltage range shall be 100–240 V AC at 50–60 Hz. Maximum long-term continuous current draw shall be 1.3 A rms at 115 V AC, 0.7 rms at 230 V AC, and 1.5 A rms at 100 V AC. AC power connectors shall be powerCON 20 with loop output. The loudspeaker shall optionally include the RMS remote monitoring system module.
Components shall be mounted in a premium multi-ply birch enclosure with a slightly textured black finish. The cabinet shall include rear and side attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be W: 19.00 in (483 mm) x H: 29.10 in (739 mm) x D: 12.50 in (318 mm) without mounting bracket. Weight shall be 64 lb (29.0 kg).
The loudspeaker shall be the Meyer Sound HMS-15AC.