Architectural Specifications
The loudspeaker shall be a self‑powered studio monitor. Its transducers shall include one 6.5‑inch diameter long‑excursion cone driver and one 1‑inch dome tweeter on a constant‑directivity waveguide.
The loudspeaker shall incorporate internal processing and a two‑channel class D amplifier, one channel for each driver. Processing shall include equalization, phase correction, driver protection, and signal division.
Performance specifications for a typical production unit shall be as follows, measured at 1/3‑octave resolution: frequency range, 45 Hz to 20 kHz; phase response, 190 Hz to 20 kHz ± 30°; linear peak SPL shall be 120.5 dB with 18.5 dB crest factor, measured free‑field with M‑noise at 4 m referred to 1 m. Horizontal coverage shall be 80° and vertical coverage shall be 50°.
Audio connectors shall be XLR 3‑pin, female and male, accommodating balanced audio. The audio input shall accept a nominal 6 dBV (2.0 V rms) signal.
The internal power supply shall perform automatic voltage selection, EMI filtering, soft current turn‑on, and surge suppression. Power requirements shall be nominal 100, 110, or 230 V AC line current at 50–60 Hz. UL and CE operating voltage range shall be 100–240 V AC at 50–60 Hz. AC power connectors for input and loop output shall be powerCON 20. Maximum long‑term continuous current draw shall be: 0.68 A rms (115 V AC),
0.36 A rms (230 V AC), and 0.79 A rms (100 V AC).
Components shall be mounted in an optimally tuned, vented enclosure constructed of premium multi‑ply birch with a low‑gloss, slightly textured black finish.
Dimensions shall be W: 9.00 in (229 mm) x H: 15.30 in (389 mm) x D: 13.24 in (336 mm). Weight shall be 25 lbs (11.3 kg).
The loudspeaker shall be the Meyer Sound Amie.